AdBlue / SCR / urea warning light diagnosis “No start in … km”? We have the solution!

Call
AdBlue no-start problem? Call us0485 38 25 36AdBlue no-start problem? Call us0485 38 25 36
0485 38 25 36 WhatsApp

DIAG AUTO BXL · Brussels and all of Belgium

AdBlue repair, engine warning light and no-start across Belgium

Engine warning light, SCR, flashing preheat, emissions, injection to be checked, risk of engine failure? Don't worry, we're here to reassure you, in Brussels and on-site. Electronic solutions for cars, vans, trucks and farm machinery. Diagnostics, read/write, cloning, programming and calibration depending on vehicle compatibility. Across Belgium, until 9pm, weekends included.

  • We travel anywhere in Belgium
  • Until 9 pm, 7 days a week
  • On-site diagnostics
  • All makes
  • ECU/TCU reading and writing
  • ECU cloning
  • Engine remapping
  • Coding and adaptation
  • Advanced electronic diagnostics
  • Mechatronic unit programming and repair
0485 38 25 36

The plate is our number. Tap it to call.

Our work on video: TikTok, YouTube, Facebook and Telegram

Animated demo: a dashboard shows three warning lights on (AdBlue, DPF, engine) and the message “No start in 800 km”. The diagnostic tool reads three faults, then the lights go out one by one.

Demo. The codes shown are examples.

Our specialities

Every job starts with a compatibility check: vehicle, ECU reference and the right equipment.

Bosch EDC17CP45, EDC17C74 and EDC17C49 engine ECUs

ECU cloning

Data transfer and engine ECU replacement, with a compatibility check and the right equipment.

  • Reading
  • Writing
  • Backup
  • Data transfer
  • Programming
Learn more

The data from the original ECU is read and backed up, then transferred to the replacement ECU. Bosch EDC17, MD1, MG1 and other references, via the OBD port or on the bench. Send us the ECU reference for a faster answer.

Detailed page
Automatic gearbox mechatronic unit, electronic circuit sideMechatronic unit with transmission control unit and connector

TCU & mechatronics

Diagnostics, programming and electronic work on transmission control units and mechatronic units, depending on model and compatibility.

  • DSG 7 DQ381
  • ZF 8HP
  • TCU cloning
  • Programming
Learn more

Gearbox stuck or gears that won't engage: we read the gearbox control unit before doing anything. TCU cloning and programming: DSG 7 DQ381 (VW, Audi), ZF 8HP (BMW) and other models. Every gearbox is checked before we promise anything: an internal mechanical fault cannot be fixed by programming.

Detailed page
Alientech KESS3 and Autotuner cases

Engine remapping

Engine calibration and performance optimisation, depending on the vehicle, the ECU, your goals and the mechanical limits.

  • Custom Stage 1
  • Alientech KESS3
  • Autotuner
Learn more

The original file is read and backed up, then the calibration is adapted to the engine and its condition. No power or torque gain is promised in advance: it depends on the vehicle and is checked case by case.

Detailed page

Programming & coding

ECU coding, adaptations, configuration and electronic programming, depending on what the vehicle allows.

  • Coding and configuration
  • Commissioning of parts
  • Module cloning
Learn more

Commissioning of parts and ECUs, activation of functions. Module cloning: BMW and MINI FRM, Mercedes EZS/EIS, Audi steering column lock. Depending on the module, ready within 24 hours in Brussels.

Detailed page

The faults people call us for

Recognise one of these messages? Tell us what the display says and we already know where to look.

  • No start in 800 km

    AdBlue fault. Sensor, pump, injector or urea tank: we read the fault and fix the cause before the vehicle locks out.

  • Risk of particulate filter clogging

    DPF full or regeneration that no longer starts. Common on vehicles driven mostly in town.

  • Engine fault: have the vehicle repaired

    EGR valve, sensor or ECU. A full diagnosis tells which one, without swapping parts at random.

  • Gearbox fault

    Gearbox stuck or gears that won't engage. We read and reprogram the gearbox control unit (TCU).

  • The engine won't start

    Van, car or truck at a standstill: we come to the vehicle, wherever it broke down.

  • Locked ECU

    Unlocking of latest-generation Bosch MD1 and MG1 ECUs, via the OBD port or on the bench, with Autotuner Master and KESS3 Master.

Our services

Full diagnostics
Reading of all ECUs and stored faults.
ECU cloning
Copy of the faulty engine ECU to its replacement. Bosch EDC17, MD1, MG1 and others.
TCU cloning (mechatronics)
Automatic gearboxes DSG 7 DQ381 (VW, Audi), ZF 8HP (BMW) and other models.
Electronic fault finding
Full diagnosis, repair of the root cause, then clearing of the fault codes.
Stage 1
Custom engine remapping: more torque, more power.
Mercedes keys and immobiliser (up to FBS3)
Lost or spare key, synchronisation after a control unit is replaced. Vehicle documents must be shown.
Unlocking of secured ECUs
Locked Bosch MD1 and MG1, via the OBD port or on the bench, with Autotuner Master and Alientech KESS3 Master.
  1. VAG · Bosch MG1CS002 H80 · TC298
  2. VAG · Bosch MG1CS008 · TC298
  3. VAG · Bosch MG1CS031 H80 · TC298
  4. VAG · Bosch MD1CS004 H80 · TC298
  5. VAG · Bosch MD1CS014 · TC299
  6. Stellantis · Bosch MD1CS003 · TC298
  7. Stellantis · Bosch MG1CS032 · SPC58
  8. Mercedes · Bosch MD1CP001 · SPC5777
  9. Mercedes · Bosch MG1CP002 · SPC5777
  10. Porsche · Bosch MG1CP007 · TC299
  11. Porsche · Bosch MG1CS047 · TC299
  12. Commercial vehicles · Bosch MD1CS069 · TC299
  13. Commercial vehicles · Bosch MD1CS089 · TC299
  14. BRP / Rotax · Bosch MG1CA920 · SPC58N
  15. DAF trucks · Delphi ETC3 UDS · MPC5566
  16. Mercedes trucks · CPC5 · SPC58

Done within 24 hours of receiving your ECU.

BOOT connection · vehicles built from 2021

Brands concerned: Audi, Bentley, Citroën, Cupra, DS, Fiat, Ford, Genesis, Opel, Peugeot, Porsche, Seat, Secma, Skoda, Toyota, Vauxhall and others

Poster: Magic Motorsport FLEX and KorheX, Corex technology to unlock latest-generation ECUs, 0485 38 25 36
Module cloning
BMW and MINI FRM, Mercedes EZS/EIS, Audi steering column lock.
Coding and configuration
Commissioning of parts and ECUs, activation of functions.
AdBlue / SCR repair
Testing of the NOx sensor, pump and injector, cleaning of crystallisation, part replacement and then adaptation.
DPF maintenance
Forced regeneration with the diagnostic tool, DPF cleaning, pressure sensor replacement.
EGR valve and intake
Cleaning or replacement of the EGR valve and intake manifold, followed by adaptation.
Pre-inspection check-up
Fault code reading and emissions system check.
Fleets and professionals
Diagnosis and electronic maintenance of commercial vehicles for businesses, breakdown services and hauliers.

Our speciality

ECU and TCU cloning

Faulty engine or gearbox control unit: the original data is read, backed up and then transferred to the replacement unit. Every part number is checked before the job.

Engine control units (ECU)

Bosch EDC17
CP45, C74, C49
Bosch MD1
Via the OBD port or on the bench
Bosch MG1
Via the OBD port or on the bench
Delphi
Depending on vehicle compatibility
Denso
Depending on vehicle compatibility
Siemens
Depending on vehicle compatibility

Automatic gearboxes and mechatronics (TCU)

DSG 7 DQ381
Volkswagen, Audi: Golf 7 and 8, Passat, Tiguan, A3, Q3
ZF 8HP
BMW: 1, 3 and 5 Series, X3, X5

Modules

FRM
BMW and MINI, ready within 24 hours
EZS / EIS
Mercedes, 1998 to 2014 models, within 24 hours
Steering lock
Audi, for example A6 2005

Another part number? Send it with the make, model and year: compatibility is checked before any work.

ECU File Service Pro

ECU / TCU file processing

Binary files and online files, for cars only.

Stage 1
Engine optimisation.
Original file backup
Read and kept safe before any work is done.
Checksum correction
Restores the integrity of a file after reading or transfer.

Workshop projects

Photos of our own work. Cloning and programming on the bench. Depending on the module, ready within 24 hours.

Programming bench: laptop, opened engine ECU and Alientech KESS3 tool
Programming benchECU reading, cloning and Stage 1, with Alientech KESS3.
Mercedes EZS/EIS ignition switches and key
EZS/EIS MercedesCloning within 24 hours, models from 1998 to 2014.
Two Audi A6 steering column locks on the workbench, with a diagnostic tablet
Audi A6 2005Car · module: steering column lock · job: steering column lock cloning.
Alientech KESS3 and Autotuner cases, engine and particulate filter warning lights
Our equipmentAlientech KESS3 and Autotuner, for Stage 1 and engine and DPF warning lights.
  • Alientech KESS3
  • Autotuner
  • LAUNCH PAD VII
Bosch EDC17CP45, EDC17C74 and EDC17C49 ECUs
ECU and TCU cloningBosch EDC17 ECUs: CP45, C74, C49.
Open Alientech KESS3 case
Alientech KESS3 MasterECU reading, writing and unlocking, via the OBD port or on the bench.
Alientech Unlock Module for KESS3, in its box
Alientech Unlock ModuleKESS3 unlock module, for locked ECUs.
Open Autotuner case
Autotuner MasterUnlocking and remapping of engine and gearbox control units.
LAUNCH X-431 PAD VII diagnostic tablet with its SmartLink box
LAUNCH X-431 PAD VIIMulti-brand diagnostics, service functions and control unit coding.
LAUNCH X-PROG 3 programmer in its case with its cables
LAUNCH X-PROG 3EEPROM and MCU reading and writing, immobiliser and key programming.
Magic Motorsport FLEX and KorheX tools

Now available

Magic Motorsport FLEX and KorheX

To serve you better, we are now equipped with Magic Motorsport's FLEX and its KorheX technology, for unlocking the latest generation of control units (ECU).

Is your vehicle next? Send us the make, model and ECU reference and we'll tell you whether the job is possible. Request a quote

On video

Our jobs on film, on site and in the workshop. The player follows our YouTube channel: every new video is added automatically.

From city cars to trucks

All makes. Private customers, garages, independent mechanics and transport professionals.

  • CarsDiagnostics, ECU/TCU cloning, Stage 1, coding and modules.
  • VansVehicle at a standstill: diagnostics and repair on site.
  • Trucks and heavy goods vehiclesDiagnostics, coding and programming: Iveco, MAN, Scania, Volvo, DAF.
  • Farm machinery and tractorsTractors and combine harvesters: Case IH, Fendt, Claas.
  • MotorcyclesDiagnostics and electronics, depending on model and ECU.
  • Construction machineryExcavators and loaders: CAT, JCB, Komatsu.
  • Renault
  • Peugeot
  • Citroën
  • DS
  • Volkswagen
  • BMW
  • Mercedes
  • Ford
  • Fiat
  • Opel
  • Jeep
  • Iveco
  • MAN
  • Scania
  • Volvo
  • DAF
  • Case IH
  • Fendt
  • Claas
  • CAT
  • JCB
  • Komatsu

How it works

  1. You call

    Describe the warning light or the message shown. Until 9 pm, Sundays included.

  2. We come to you

    Anywhere in Belgium, right to the vehicle.

  3. On-site diagnostics

    We read the ECUs to find the real cause.

  4. Solution

    Repair, coding or programming, then the faults are read again.

AdBlue · SCR · urea breakdown help

Vehicle breakdown repair and no-start across Belgium

"UREA no start" message, SCR fault, "check injection" or risk of engine damage? We come to your broken-down vehicle, in Brussels and anywhere in Belgium.

My vehicle won't start because of AdBlue
No-start caused by AdBlue: we read the SCR system faults (NOx sensor, pump, injector, urea tank) and fix the cause.
UREA no start SCR
"No start in … km" countdown or vehicle already blocked: on-site AdBlue diagnosis and repair.
Check injection
Electronic diagnosis of the injection, EGR and DPF to find the real cause of the message.
Risk of engine damage
Warning light or alert message: call before driving, we check the fault before it gets worse.
AdBlue fault solution in Brussels
Cars, vans, trucks and agricultural machinery, until 9 pm, weekends included.
DIAG AUTO BXL poster: AdBlue diagnostics and adjustments in 45 min, in compliance with regulations, 0485 38 25 36 Detailed page

Customer reviews

Your opinion matters: rate our work from 1 to 5 stars.

No reviews yet. Be the first to leave one!

Leave a review

Frequently asked questions

Where do you travel?

Anywhere in Belgium, right to the vehicle: Brussels and its municipalities (Anderlecht, Ixelles, Schaerbeek, Uccle, Forest, Molenbeek, Etterbeek, Evere, Jette, Woluwe…), Antwerp, Ghent, Liège, Charleroi, Namur, Mons and the rest of the country.

What are your hours?

Until 9 pm, weekends included, Sundays too. Call 0485 38 25 36 or write on WhatsApp.

Which vehicles do you work on?

Cars, vans, heavy goods vehicles and trucks, agricultural machinery, construction machinery and motorcycles, all makes. Private customers and professionals alike.

Can you clone an engine (ECU) or gearbox (TCU) control unit?

Yes: Bosch EDC17, MD1, MG1, DSG 7 DQ381 and ZF 8HP gearboxes and other references, via the OBD port or on the bench. Send the control unit reference for a faster answer.

How much do you gain with a Stage 1 remap?

No gain is announced in advance: it depends on the vehicle, the engine and its condition. The original file is read and backed up before any calibration.

AdBlue warning “No start in … km”: what should you do?

Call before the vehicle locks up. We read the fault (sensor, pump, injector or urea tank) and fix the cause, on site.

How long does it take to clone a module?

Depending on the module, it is ready within 24 hours in Brussels: BMW and MINI FRM, Mercedes EZS/EIS, Audi steering column lock.

Another question? The answer is just a phone call away.

Quote request

The more precise the request (ECU reference, fault code), the faster the answer.

The form prepares a WhatsApp message with your answers: it is only sent when you tap “Send” in WhatsApp. A copy of the request is kept so we can reply to you; it is never shared.

A warning light, a message, a breakdown? Call us.

Available until 9 pm, weekends too. We travel anywhere in Belgium.

WhatsApp 0485 38 25 36